Phase formation in the tantalum carbonitride film deposited with atomic layer deposition using ammonia
SCIE
SCOPUS
- Title
- Phase formation in the tantalum carbonitride film deposited with atomic layer deposition using ammonia
- Authors
- Song, MK; Rhee, SW
- Date Issued
- 2008-01
- Publisher
- ELECTROCHEMICAL SOC INC
- Abstract
- Tantalum carbonitride (TaCN) thin films were deposited on SiO(2) surface with plasma enhanced atomic layer deposition (PEALD) and thermal atomic layer deposition using tert-butylimido[tri-diethylamido]tantalum (TBTDET) and ammonia. It was confirmed that the film was a mixture of TaC, TaN, Ta(3)N(5), and Ta(2)O(5) with oxide phase formed from the postdeposition uptake of oxygen from the air. It was shown that electrical properties of TaCN film were affected by the atomic composition and phase composition in the film. Effect of the process parameters, such as deposition temperature and plasma power on film composition and electronic properties was studied. Formation of carbide phase was suppressed in the TaCN film deposited with ammonia. As the deposition temperature was increased, the carbide phase and TaN phase in the film were increased, Ta(3)N(5) phase in the film was decreased and the film resistivity was decreased. The uptake of oxygen after deposition was about 5 atom % with the PEALD process and about 30 atom % with thermal ALD process and it is believed that denser film could be obtained with plasma. The resistivity of TaCN film deposited at 350 degrees C and 150 W using PEALD process was about 6.75x10(4) mu Omega cm. (C) 2008 The Electrochemical Society.
- URI
- https://oasis.postech.ac.kr/handle/2014.oak/11163
- DOI
- 10.1149/1.2967333
- ISSN
- 0013-4651
- Article Type
- Article
- Citation
- JOURNAL OF THE ELECTROCHEMICAL SOCIETY, vol. 155, no. 10, page. H823 - H828, 2008-01
- Files in This Item:
-
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.