Effects of Annealing Temperature on Microstructure and Tensile Properties in Ferritic Lightweight Steels
SCIE
SCOPUS
- Title
- Effects of Annealing Temperature on Microstructure and Tensile Properties in Ferritic Lightweight Steels
- Authors
- Seung Youb Han; Sang yong Shin; Hyuk-Joong Lee; Lee, BJ; Lee, S; Kim, NJ; Jai-Hyun Kwak
- Date Issued
- 2012-03
- Publisher
- SPRINGER
- Abstract
- An investigation was conducted into the effects of annealing temperature on microstructure and tensile properties of ferritic lightweight steels. Two steels were fabricated by varying the C content, and were annealed at 573 K to 1173 K (300 A degrees C to 900 A degrees C) for 1 hour. According to the microstructural analysis results, kappa-carbides were formed at about 973 K (700 A degrees C), which was confirmed by equilibrium phase diagrams calculated from a THERMO-CALC program. In the steel containing low carbon content, needle-shaped kappa-carbides were homogeneously dispersed in the ferrite matrix, whereas bulky band-shaped martensites were distributed in the steel containing high carbon content. In the 973 K (700 A degrees C)-annealed specimen of the steel containing high carbon content, deformation bands were formed throughout the specimen, while fine carbides were sufficiently deformed inside the deformation bands, thereby resulting in the greatest level of strength and ductility. These results indicated that the appropriate annealing treatment of steel containing high carbon content was useful for the improvement of both strength and ductility over steel containing low carbon content.
- URI
- https://oasis.postech.ac.kr/handle/2014.oak/16004
- DOI
- 10.1007/S11661-011-0942-2
- ISSN
- 1073-5623
- Article Type
- Article
- Citation
- METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, vol. 43A, no. 3, page. 843 - 853, 2012-03
- Files in This Item:
-
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.