Effects of annealing conditions on microstructure and mechanical properties of low carbon, manganese transformation-induced plasticity steel
SCIE
SCOPUS
KCI
- Title
- Effects of annealing conditions on microstructure and mechanical properties of low carbon, manganese transformation-induced plasticity steel
- Authors
- Jang, JM; Sung-Joon Kim; Nam Hyun Kang; Kyung-Mox Cho; Suh, DW
- Date Issued
- 2009-12
- Publisher
- KIM
- Abstract
- The effects of annealing conditions on microstructural evolution and mechanical properties have been investigated in low carbon, manganese TRIP (Mn TRIP) steel based on a 0.12C-6Mn-0.5Si-3Al alloy system. The microstructure of cold-rolled sheet subjected to annealing at 760 A degrees C to 800 A degrees C for 30 s to 1800 s consists of a recrystallized ferrite matrix and fine-grained austenite with a phase fraction of 25 % to 35 %. Variation of the annealing conditions remarkably influenced the characteristics of constituent phases and thus affected the tensile strength and elongation. Optimization of microstructural parameters such as grain size and fraction of constituent phases, which control the yield strength, overall work hardening, and the kinetics of strain-induced martensite formation, is thus critical for obtaining an exceptional mechanical balance of the alloy.
- Keywords
- TRIP steel; intercritical annealing; microstrucutre; tensile properties; RETAINED AUSTENITE; MULTIPHASE STEELS; MARTENSITIC-TRANSFORMATION; GRAIN-SIZE; TRIP STEEL; BEHAVIOR; TENSILE
- URI
- https://oasis.postech.ac.kr/handle/2014.oak/16712
- DOI
- 10.1007/S12540-009-0909-7
- ISSN
- 1598-9623
- Article Type
- Article
- Citation
- METALS AND MATERIALS INTERNATIONAL, vol. 15, no. 6, page. 909 - 916, 2009-12
- Files in This Item:
- There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.