Enhancing tensile properties of ultrafine-grained medium-carbon steel utilizing fine carbides
SCIE
SCOPUS
- Title
- Enhancing tensile properties of ultrafine-grained medium-carbon steel utilizing fine carbides
- Authors
- Lee, T; Park, CH; Lee, DL; Lee, CS
- Date Issued
- 2011-08-15
- Publisher
- ELSEVIER SCIENCE SA
- Abstract
- The aim of the present study is to evaluate the influence of nano-sized carbides upon tensile behavior in UFG medium-carbon steels and to develop a material with improved tensile properties. UFG medium-carbon steels with fine carbides were successfully fabricated by multi-pass caliber rolling at 773 K. Alloying chromium and molybdenum resulted in thinner pearlitic lamellae, which were transformed into finer particles after severe plastic deformation. The UFG steel containing the alloying elements exhibited superior tensile properties, which was attributed to the enhanced strain hardening rate by the imbedded finer particles. Subsequent annealing induced growth of grains and particles, which also recovered elongation at the expense of strength. All UFG steels investigated here showed a yield-point phenomenon due to the decreased hardening rate and lack of mobile dislocations and their sources. The deteriorating effect of particle growth overwhelmed the improving effect of grain growth after annealing of the UFG medium-carbon steel, leading to a reduced strain hardening rate. This resulted in a positive correlation between a grain size and Luders elongation in the investigated UFG steels. (C) 2011 Elsevier B.V. All rights reserved.
- Keywords
- Grain refinement; Warm caliber rolling; Tensile property; Fine carbide; Strain hardening rate; MECHANICAL-PROPERTIES; ALLOYING ELEMENTS; DEFORMATION; DUCTILITY; STRENGTH; MICROSTRUCTURE; PARTICLES; CEMENTITE; ALUMINUM; BEHAVIOR
- URI
- https://oasis.postech.ac.kr/handle/2014.oak/17173
- DOI
- 10.1016/J.MSEA.2011.05.007
- ISSN
- 0921-5093
- Article Type
- Article
- Citation
- MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, vol. 528, no. 21, page. 6558 - 6564, 2011-08-15
- Files in This Item:
- There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.