Humidity effects on adhesion strength between solder ball and epoxy underfills
SCIE
SCOPUS
- Title
- Humidity effects on adhesion strength between solder ball and epoxy underfills
- Authors
- Park, CE; Han, BJ; Bair, HE
- Date Issued
- 1997-07
- Publisher
- ELSEVIER SCI LTD
- Abstract
- The curing behaviour and the development of physical properties of three commercial, silica filled epoxy/ anhydride resins that are used in solder 'flip-chip' technology were investigated by differential scanning calorimetry, dynamic mechanical analysis (d.m.a.) and Fourier transform infra-red (FTi.r.) spectroscopy. In particular it was found that if the uncured resins were aged in the presence of moisture at 23 degrees C and then cured, the resulting properties such as glass transition temperature and rubbery modulus were significantly lower than the ultimate properties which developed if the resins were stored in the absence of water and then reacted. Also, under elevated temperatures and in the presence of high humidities or steam the hydrolysis of fully cured resins which had been previously stored in a dry state was detected by FTi.r. and d.m.a. measurements. The adhesion strength between solder balls and these epoxy underfill materials was found to deteriorate when aged under humid conditions. (C) 1997 Elsevier Science Ltd.
- Keywords
- epoxy underfill; adhesion strength; humidity
- URI
- https://oasis.postech.ac.kr/handle/2014.oak/21277
- DOI
- 10.1016/S0032-3861(96)00972-X
- ISSN
- 0032-3861
- Article Type
- Article
- Citation
- POLYMER, vol. 38, no. 15, page. 3811 - 3818, 1997-07
- Files in This Item:
- There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.