DC Field | Value | Language |
---|---|---|
dc.contributor.author | Jeong, YH | - |
dc.contributor.author | Min, BK | - |
dc.contributor.author | Cho, DW | - |
dc.date.accessioned | 2016-04-01T01:51:19Z | - |
dc.date.available | 2016-04-01T01:51:19Z | - |
dc.date.created | 2009-08-21 | - |
dc.date.issued | 2006-10 | - |
dc.identifier.issn | 0890-6955 | - |
dc.identifier.other | 2006-OAK-0000006181 | - |
dc.identifier.uri | https://oasis.postech.ac.kr/handle/2014.oak/23853 | - |
dc.description.abstract | Leveling is an important part of a machine tool installation process because it significantly influences the product quality, machine tool accuracy, and machine lifetime. Conventional leveling procedures are performed by skilled engineers using leveling instruments such as spirit or electronic levels. It is difficult to monitor the level of a machine tool because an accurate leveling instrument is expensive and difficult to install. Therefore, a novel methodology for estimating the inclination angle of a machine tool feed drive is proposed in this paper to overcome the difficulties of leveling. The proposed methodology utilizes motor current measurements and a new mathematical model of the machine tool feed drive that considers the inclination. Experimental results showed that the proposed method successfully estimates the inclination angle and enhances the accuracy of the machine tool feed drive model by considering the inclination effects. (C) 2005 Elsevier Ltd. All rights reserved. | - |
dc.description.statementofresponsibility | X | - |
dc.language | English | - |
dc.publisher | ELSEVIER SCI LTD | - |
dc.relation.isPartOf | INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE | - |
dc.subject | current measurement | - |
dc.subject | machine tool feed drive | - |
dc.subject | machine tool leveling | - |
dc.subject | dynamic simulation | - |
dc.subject | CUTTING FORCE | - |
dc.subject | SIMULATION | - |
dc.title | Estimation of machine tool feed drive inclination from current measurements and a mathematical model | - |
dc.type | Article | - |
dc.contributor.college | 기계공학과 | - |
dc.identifier.doi | 10.1016/j.ijmachtools.2005.10.015 | - |
dc.author.google | Jeong, YH | - |
dc.author.google | Min, BK | - |
dc.author.google | Cho, DW | - |
dc.relation.volume | 46 | - |
dc.relation.issue | 12-13 | - |
dc.relation.startpage | 1343 | - |
dc.relation.lastpage | 1349 | - |
dc.contributor.id | 10102903 | - |
dc.relation.journal | INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE | - |
dc.relation.index | SCI급, SCOPUS 등재논문 | - |
dc.relation.sci | SCI | - |
dc.collections.name | Journal Papers | - |
dc.type.rims | ART | - |
dc.identifier.bibliographicCitation | INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, v.46, no.12-13, pp.1343 - 1349 | - |
dc.identifier.wosid | 000240047800008 | - |
dc.date.tcdate | 2019-01-01 | - |
dc.citation.endPage | 1349 | - |
dc.citation.number | 12-13 | - |
dc.citation.startPage | 1343 | - |
dc.citation.title | INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE | - |
dc.citation.volume | 46 | - |
dc.contributor.affiliatedAuthor | Cho, DW | - |
dc.identifier.scopusid | 2-s2.0-33746343360 | - |
dc.description.journalClass | 1 | - |
dc.description.journalClass | 1 | - |
dc.description.wostc | 13 | - |
dc.type.docType | Article | - |
dc.subject.keywordAuthor | current measurement | - |
dc.subject.keywordAuthor | machine tool feed drive | - |
dc.subject.keywordAuthor | machine tool leveling | - |
dc.subject.keywordAuthor | dynamic simulation | - |
dc.relation.journalWebOfScienceCategory | Engineering, Manufacturing | - |
dc.relation.journalWebOfScienceCategory | Engineering, Mechanical | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.relation.journalResearchArea | Engineering | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.
library@postech.ac.kr Tel: 054-279-2548
Copyrights © by 2017 Pohang University of Science ad Technology All right reserved.