DC Field | Value | Language |
---|---|---|
dc.contributor.author | Dongguo Lin | - |
dc.contributor.author | Jifu Xu | - |
dc.contributor.author | Zhongde Shan | - |
dc.contributor.author | Sung Taek Chung | - |
dc.contributor.author | Seong Jin Park | - |
dc.date.accessioned | 2016-04-01T07:58:41Z | - |
dc.date.available | 2016-04-01T07:58:41Z | - |
dc.date.created | 2015-06-15 | - |
dc.date.issued | 2015-06 | - |
dc.identifier.issn | 2234-7593 | - |
dc.identifier.other | 2015-OAK-0000032694 | - |
dc.identifier.uri | https://oasis.postech.ac.kr/handle/2014.oak/27082 | - |
dc.description.abstract | In this work, a cutting tool for sand-mold milling was fabricated by powder injection molding (PIM) technology using 90WC-10Co alloy powder for machining sand molds in patternless sand-casting technology. The work included design of cutting tool tip, injection mold and binder system. Also, for the PIM process, mixing, injection molding, debinding and sintering process were investigated experimentally Finally the properties for final products were tested, such as micro structures, element composition, wear resistance and so on. The cutting tool fabricated by PIM had a final density of 14.21 g/cm(3) (95% of theoretical density) and a dimension accuracy over 98%. Also, in sand-mold machining test, it showed an abrasion loss of 0.16 mm after working for 3 hrs. The results showed that a whole cutting tool was fabricated using PIM technology successfully, and it showed out good mechanical performances. | - |
dc.description.statementofresponsibility | X | - |
dc.language | English | - |
dc.publisher | KOREAN SOC PRECISION ENG | - |
dc.relation.isPartOf | INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING | - |
dc.subject | TUNGSTEN CARBIDE | - |
dc.subject | MICROSTRUCTURE | - |
dc.subject | HARDNESS | - |
dc.title | Fabrication of WC-Co Cutting Tool by Powder Injection Molding | - |
dc.type | Article | - |
dc.contributor.college | 기계공학과 | - |
dc.identifier.doi | 10.1007/s12541-015-0189-8 | - |
dc.contributor.id | 10060955 | - |
dc.relation.journal | International Journal of Precision Engineering and Manufacturing | - |
dc.collections.name | Journal Papers | - |
dc.type.rims | ART | - |
dc.identifier.bibliographicCitation | INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, v.16, no.7, pp.1435 - 1439 | - |
dc.identifier.wosid | 000356562300032 | - |
dc.date.tcdate | 2019-02-01 | - |
dc.citation.endPage | 1439 | - |
dc.citation.number | 7 | - |
dc.citation.startPage | 1435 | - |
dc.citation.title | INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING | - |
dc.citation.volume | 16 | - |
dc.contributor.affiliatedAuthor | Seong Jin Park | - |
dc.identifier.scopusid | 2-s2.0-84934908118 | - |
dc.description.journalClass | 1 | - |
dc.description.journalClass | 1 | - |
dc.description.wostc | 4 | - |
dc.description.scptc | 4 | * |
dc.date.scptcdate | 2018-05-121 | * |
dc.type.docType | Article; Proceedings Paper | - |
dc.subject.keywordAuthor | WC-Co alloy | - |
dc.subject.keywordAuthor | Cutting tool | - |
dc.subject.keywordAuthor | Powder injection molding | - |
dc.subject.keywordAuthor | Sintering | - |
dc.subject.keywordAuthor | Manufacturing | - |
dc.relation.journalWebOfScienceCategory | Engineering, Manufacturing | - |
dc.relation.journalWebOfScienceCategory | Engineering, Mechanical | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.description.journalRegisteredClass | kci | - |
dc.relation.journalResearchArea | Engineering | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.
library@postech.ac.kr Tel: 054-279-2548
Copyrights © by 2017 Pohang University of Science ad Technology All right reserved.