An experimental verification of the finite element modelling of equal channel angular pressing
SCIE
SCOPUS
- Title
- An experimental verification of the finite element modelling of equal channel angular pressing
- Authors
- Nagasekhar, AV; Yoon, SC; Tick-Hon, Y; Kim, HS
- Date Issued
- 2009-08
- Publisher
- ELSEVIER SCIENCE BV
- Abstract
- Strain hardening of pure copper and friction between the sample and die channels is considered for finite element modelling. To validate the FEM results, the FEM calculated effective strain variations were compared with the hardness measurements. Simulated load-stroke curve and peak load calculations were also compared with the experimentally recorded load-stroke curve and peak load. Different stages of the load-stroke curve of the ECAP process was explained in detail. In over all, good conformity is observed between the FEM calculations and experimental results. (C) 2009 Elsevier B.V. All rights reserved.
- Keywords
- Equal channel angular pressing; Equal channel angular extrusion; Severe plastic deformation; Finite element modelling; Strain homogeneity; Peak load; FINE GRAINED MATERIALS; DEFORMATION-BEHAVIOR; PLASTIC-DEFORMATION; BILLET DEFORMATION; STRAIN HOMOGENEITY; ECAE PROCESS; TOOL-ANGLES; EXTRUSION; SIMULATION; FLOW
- URI
- https://oasis.postech.ac.kr/handle/2014.oak/27551
- DOI
- 10.1016/J.COMMATSCI.2009.03.018
- ISSN
- 0927-0256
- Article Type
- Article
- Citation
- COMPUTATIONAL MATERIALS SCIENCE, vol. 46, no. 2, page. 347 - 351, 2009-08
- Files in This Item:
- There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.