Microstructural development of adiabatic shear bands in ultra-fine-grained low-carbon steels fabricated by equal channel angular pressing
SCIE
SCOPUS
- Title
- Microstructural development of adiabatic shear bands in ultra-fine-grained low-carbon steels fabricated by equal channel angular pressing
- Authors
- Hwang, B; Lee, S; Kim, YC; Kim, NJ; Shin, DH
- Date Issued
- 2006-12-15
- Publisher
- ELSEVIER SCIENCE SA
- Abstract
- Microstructural development of adiabatic shear bands formed in ultra-fine-grained low-carbon steels fabricated by equal channel angular pressing (ECAP) was investigated in this study. Dynamic torsional tests were conducted on four steel specimens, two of which were annealed after ECAP, using a torsional Kolsky bar. The ECAP'ed specimen consisted of fine equiaxed grains of 0.2 mu m in size, which were slightly coarsened and had an equiaxed shape after annealing. Some adiabatic shear bands were observed at the gage center of the dynamically deformed torsional specimen, and their width was narrower in the ECAP'ed specimen than in the 1-h annealed specimen. Detailed transmission electron microscopic analysis on adiabatic shear bands indicated that very fine equiaxed grains of 0.05-0.2 mu m in size were developed within the adiabatic shear band, and that cell structures were formed in the shear band flank by partitioning elongated ferrites. These phenomena were explained by dynamic recovery and recrystallization due to the highly localized plastic deformation and temperature rise occurring in the shear band. The temperature rise in the shear band formation process was estimated to be above 540 degrees C by observing spheroidized cementites inside pearlite grains. (c) 2006 Elsevier B.V. All rights reserved.
- Keywords
- dynamic torsional test; ultra-fine-grained low-carbon steel; equal channel angular pressing (ECAP); adiabatic shear band; annealing; TRANSMISSION ELECTRON-MICROSCOPY; PLASTIC-DEFORMATION; HIGH-STRAIN; DYNAMIC RECRYSTALLIZATION; LOCALIZATION; TITANIUM; TRANSFORMATION; BEHAVIOR; STRESS; COPPER
- URI
- https://oasis.postech.ac.kr/handle/2014.oak/29603
- DOI
- 10.1016/j.msea.2006.08.045
- ISSN
- 0921-5093
- Article Type
- Article
- Citation
- MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, vol. 441, no. 1-2, page. 308 - 320, 2006-12-15
- Files in This Item:
- There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.