DC Field | Value | Language |
---|---|---|
dc.contributor.author | Kang, Y | - |
dc.contributor.author | Jang, Y | - |
dc.contributor.author | Choi, Y | - |
dc.contributor.author | Lee, D | - |
dc.contributor.author | Won, S | - |
dc.date.accessioned | 2017-07-19T12:12:12Z | - |
dc.date.available | 2017-07-19T12:12:12Z | - |
dc.date.created | 2016-01-11 | - |
dc.date.issued | 2015-01 | - |
dc.identifier.issn | 0915-1559 | - |
dc.identifier.uri | https://oasis.postech.ac.kr/handle/2014.oak/35430 | - |
dc.description.abstract | A model to describe the curvature of the centerline of a strip at the delivery side during hot rolling can be used to predict the longitudinal shape of the strip after rolling, and can be useful when designing a controller to reduce camber generation. However, the existing model was obtained from studies about side-slipping, and is based on incorrect assumptions. This paper uses the definition of curvature and tangential angle to clarify why the assumptions of the former model are incorrect. Also, this paper proposes a new model for curvature of the centerline at the delivery side; this model is based on the assumption that the curved strip is generated only by the difference between the velocities of the sides of the strip. The accuracy of the proposed model is validated by FEM simulation. | - |
dc.language | English | - |
dc.publisher | Nippon Tekko Kyokai/Iron and Steel Institute of Japan | - |
dc.relation.isPartOf | ISIJ International | - |
dc.title | An Improved Model for Camber Generation during Rough Rolling Process | - |
dc.type | Article | - |
dc.identifier.doi | 10.2355/isijinternational.ISIJINT-2015-088 | - |
dc.type.rims | ART | - |
dc.identifier.bibliographicCitation | ISIJ International, v.55, no.9, pp.1980 - 1986 | - |
dc.identifier.wosid | 000362154800024 | - |
dc.date.tcdate | 2019-03-01 | - |
dc.citation.endPage | 1986 | - |
dc.citation.number | 9 | - |
dc.citation.startPage | 1980 | - |
dc.citation.title | ISIJ International | - |
dc.citation.volume | 55 | - |
dc.contributor.affiliatedAuthor | Won, S | - |
dc.identifier.scopusid | 2-s2.0-84943163834 | - |
dc.description.journalClass | 1 | - |
dc.description.journalClass | 1 | - |
dc.description.wostc | 2 | - |
dc.description.isOpenAccess | Y | - |
dc.type.docType | Article | - |
dc.subject.keywordAuthor | camber | - |
dc.subject.keywordAuthor | side-slipping | - |
dc.subject.keywordAuthor | finite element method (FEM) | - |
dc.relation.journalWebOfScienceCategory | Metallurgy & Metallurgical Engineering | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.relation.journalResearchArea | Metallurgy & Metallurgical Engineering | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.
library@postech.ac.kr Tel: 054-279-2548
Copyrights © by 2017 Pohang University of Science ad Technology All right reserved.