DC Field | Value | Language |
---|---|---|
dc.contributor.author | Kim, Jae Hyung | - |
dc.contributor.author | Kwon, Young Jin | - |
dc.contributor.author | Lee, Taekyung | - |
dc.contributor.author | Lee, Kee-Ahn | - |
dc.contributor.author | Kim, Hyoung Seop | - |
dc.contributor.author | Lee, Chong Soo | - |
dc.date.accessioned | 2018-06-15T05:34:58Z | - |
dc.date.available | 2018-06-15T05:34:58Z | - |
dc.date.created | 2018-02-05 | - |
dc.date.issued | 2018-01 | - |
dc.identifier.issn | 1598-9623 | - |
dc.identifier.uri | https://oasis.postech.ac.kr/handle/2014.oak/50623 | - |
dc.description.abstract | Stretch-flangeability is one of important formability parameters of thin steel sheets used in the automotive industry. There have been many attempts to predict hole expansion ratio (HER), a typical term to evaluate stretch-flangeability, using uniaxial tensile properties for convenience. This paper suggests a new approach that uses total elongation and average normal anisotropy to predict HER of thin steel sheets. The method provides a good linear relationship between HER of the machined hole and the predictive variables in a variety of materials with different microstructures obtained using different processing methods. The HER of the punched hole was also well predicted using the similar approach, which reflected only the portion of post uniform elongation. The physical meaning drawn by our approach successfully explained the poor HER of austenitic steels despite their considerable elongation. The proposed method to predict HER is simple and cost-effective, so it will be useful in industry. In addition, the model provides a physical explanation of HER, so it will be useful in academia. | - |
dc.language | English | - |
dc.publisher | KOREAN INST METALS MATERIALS | - |
dc.relation.isPartOf | METALS AND MATERIALS INTERNATIONAL | - |
dc.subject | HIGH-STRENGTH STEELS | - |
dc.subject | FERRITIC STAINLESS-STEEL | - |
dc.subject | STRETCH-FLANGEABILITY | - |
dc.subject | SHEARED EDGE | - |
dc.subject | TWIP STEEL | - |
dc.subject | R-VALUE | - |
dc.subject | TEXTURE | - |
dc.subject | FORMABILITY | - |
dc.subject | MICROSTRUCTURE | - |
dc.subject | ANISOTROPY | - |
dc.title | Prediction of hole expansion ratio for various steel sheets based on uniaxial tensile properties | - |
dc.title.alternative | Prediction of Hole Expansion Ratio for Various Steel Sheets Based on Uniaxial Tensile Properties | - |
dc.type | Article | - |
dc.identifier.doi | 10.1007/s12540-017-7288-2 | - |
dc.type.rims | ART | - |
dc.identifier.bibliographicCitation | METALS AND MATERIALS INTERNATIONAL, v.24, no.1, pp.187 - 194 | - |
dc.identifier.kciid | ART002304363 | - |
dc.identifier.wosid | 000419534500023 | - |
dc.date.tcdate | 2018-03-23 | - |
dc.citation.endPage | 194 | - |
dc.citation.number | 1 | - |
dc.citation.startPage | 187 | - |
dc.citation.title | METALS AND MATERIALS INTERNATIONAL | - |
dc.citation.volume | 24 | - |
dc.contributor.affiliatedAuthor | Kwon, Young Jin | - |
dc.contributor.affiliatedAuthor | Kim, Hyoung Seop | - |
dc.contributor.affiliatedAuthor | Lee, Chong Soo | - |
dc.identifier.scopusid | 2-s2.0-85040131971 | - |
dc.description.journalClass | 1 | - |
dc.description.journalClass | 1 | - |
dc.type.docType | Article | - |
dc.subject.keywordPlus | HIGH-STRENGTH STEELS | - |
dc.subject.keywordPlus | FERRITIC STAINLESS-STEEL | - |
dc.subject.keywordPlus | STRETCH-FLANGEABILITY | - |
dc.subject.keywordPlus | SHEARED EDGE | - |
dc.subject.keywordPlus | TWIP STEEL | - |
dc.subject.keywordPlus | R-VALUE | - |
dc.subject.keywordPlus | TEXTURE | - |
dc.subject.keywordPlus | FORMABILITY | - |
dc.subject.keywordPlus | MICROSTRUCTURE | - |
dc.subject.keywordPlus | ANISOTROPY | - |
dc.subject.keywordAuthor | metals | - |
dc.subject.keywordAuthor | fracture | - |
dc.subject.keywordAuthor | mechanical properties | - |
dc.subject.keywordAuthor | plasticity | - |
dc.subject.keywordAuthor | tensile test | - |
dc.relation.journalWebOfScienceCategory | Materials Science, Multidisciplinary | - |
dc.relation.journalWebOfScienceCategory | Metallurgy & Metallurgical Engineering | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.description.journalRegisteredClass | kci | - |
dc.relation.journalResearchArea | Materials Science | - |
dc.relation.journalResearchArea | Metallurgy & Metallurgical Engineering | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.
library@postech.ac.kr Tel: 054-279-2548
Copyrights © by 2017 Pohang University of Science ad Technology All right reserved.