The radial dimension of a supersonic jet expansion from conical nozzle

Abstract

In a laser-cluster interaction experiment, the radial dimension of a supersonic gas jet is an important parameter for the characterization of interaction volume. It is noted that due to the lateral gas expansion, the diameter of a supersonic gas jet is larger than the idealized diameter of a gas jet from a conical nozzle. In this work the effect of the lateral expansion on the radial dimension of gas jet was investigated by simulations. Based on the simulation results, the diameter of gas jet l was compared in detail with the corresponding diameter l(T) in the idealized straight streamline model and the diameter l(H) at a half of maximum atom density of gas jet. The results reveal how the deviation of l from l(T) (l(H)) changes with respect to the opening angles of conical nozzles, the heights above the nozzle, the nozzle lengths and the gas backing pressures. It is found that the diameter of gas jet l is close to the idealized diameter l(T) and l(H) in the case where a long conical nozzle with a large opening angle is used under a low gas backing pressure. In this case, the effect of the lateral expansion is so weak that the edge of gas jet becomes sharp and the radial distribution of atom density in gas jet tends to be uniform. The results could be useful for the characterization of a supersonic gas jet. (C) 2016 Author(s). All article content, except where otherwise noted, is licensed under a Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).